5/12/22 Assembling the Motor arms

Eesh Vij

Pretty straight forward for the most part. Surprisingly the CF felt heavier than the prototype MDF wood frame but I might be wrong.

While mounting the motors the screws were like 1mm too long so I went to home depot and bought some #6 lock washers to fill the gap as well prevent it from coming loose from vibration. 

Lock washers are like washers which are springs (what they are)

Four motor arms done :D

Wire extensions also soldered onto the motor wires and routed through the tube.

We can potentially add LED wires but that's more decorative than anything.

One arm is about 0.75mm longer than the others but it shouldn't make a difference.